ETHRX Hardware platform · N305 · Rack
The hardwareunder themeasurement.
A rack-class appliance with a hardware clock on every data port, a TPM 2.0 root of trust and firmware set for timing that holds still. CHAOS runs on it today.
01 / 05 · The data path
Ports 3 & 4
The two sides of the link under test. Intel i226-V controllers at 2.5 GbE, bridged at Layer 2 with no address of their own, each with its own hardware clock.
2clocksptp0 and ptp1, one on each port
- Controller
- Intel i226-V
- Speed
- 2.5 GbE each
- Clocks
- ptp0, ptp1
02 / 05 · Spare, with a clock
Port 5
A third clocked port. CHAOS sends its own calibration traffic from it, so the box can measure itself.
ptp2its own hardware clock
- Controller
- Intel i226-V
- Speed
- 2.5 GbE
03 / 05 · Management
Port 6
The web UI, the API and updates come in here, on a port of their own, so control traffic never crosses the data path.
1portfor control, apart from the data
- Controller
- Intel i226-V
- Speed
- 2.5 GbE
04 / 05 · Held in reserve
Ports 1 & 2
Two 10 GbE ports kept back for higher-rate work. They stamp in software only, so the measured path stays on the clocked ports.
2 × 10GbEMarvell AQC113C, NBASE-T
- Controller
- Marvell AQC113C
- Timestamps
- Software only
05 / 05 · In and out
Power & USB
12 V in, USB-C, and a blue USB 3 port. Plug in a drive and a whole run, captures included, leaves with you.
168MB/smeasured write to a USB 3 drive
- Power
- 12 V DC
- USB
- USB-C, USB 3 at 5 Gbps